Update Micromax A110 Canvas 2 to Jelly Bean ROM

This post is meant for the guys, who are still waiting to taste Jelly Bean 4.1.1 on their Canvas2 having ICS 4.0. So here is stepwise procedure for you.

How to update Micromax A110 Canvas 2 to Jelly Bean ROM:

1. Install Canvas 2 drivers.
2. Extract SP Flash Tools and V3_120313_Update to Jelly Bean zip files.
3. Open SP Flash Tools.
4. Click on the Scatter-Loading button

 5. Browse to the MT6577_Android_scatter_emmc.txt in extracted 
         S9081_MP_F4.1_B1_IN_MMX_1.10 folder

 

6. In Flash Tool, go to Options and enable USB Mode.

7. Again go to Options >> DA Download All >> Speed >> Force to high speed.

8. Switch off the phone completely.

9. In SP Flash Tool window, click Firmware >> Upgrade. Ignore any warning messages and click    "Yes"

10. Now connect your phone to your PC.

11.Upgrade process will start. Flash Tool will start the flashing process. Yellow bar at the bottom of  the Flash Tool indicates the progress of process.

Don't disconnect phone or interrupt the process until you see the "OK" message

12. Once the process is completed, Green Ring will appear on your device which indicates that the process is completed successfully.

For the first time, startup can take little bit time.
You will see the superfone logo appearing for a while, but don worry it’s normal.

Downloads:

• SP Flash Tools


• V3_ROM120313_Update to Jelly Bean

Disclaimer: Even though the procedure is tested on Canvas2 excusively, I can't rule out any possibility of bricking or like that. But as long as you follow the instructions carefully, chances of things going out of favour are feeble. All the best.