Guys once again I am here with a tutorial on "How to root Stock Jelly Bean and Flash CWM on Canvas2". There were few issues with the previous post, and thus deleted it. Inconvenience is highly regretted.

But prior to that I would advise you to keep the backup of your phone/data. 

All required download links are there at the end of the post.

Rename the file to recovery.img

Go to the S9081_MP_F4.1_B1_IN_MMX_1.10 folder and replace the original recovery.zip with the above file.

Open Flash Tools

Click on the Scatter-Loading button.

Choose the MT6577_Android_scatter_emmc.txt

Multiple entries will appear. Uncheck all entries except "Recovery"

Now click on Recovery

Choose the clockworkmod recovery.img (placed within S9081_MP_F4.1_B1_IN_MMX_1.10 folder). Double check that you have checked none other than Recovery.

Click Download

Switch off  phone

Connect phone to the PC with Volume Up key held. It will start flashing your phone with the new recovery.img.

The Flash Tool will start the flashing process.

Watch yellow progress bar at the bottom of the Flash Tool

After the process completes,  Green Colored Ring will appear on your device. Its an indication of process being completed successfully.

Disconnect your phone.

Choose Recovery mode from the next screen. CWM Recovery menu will be there.

Flash the SU binaries if you want root.

Just place it in the SD card go to CWM recovery and select the option Apply Update from SD Card

You have CWM recovery and ROOT access on your Micromax A110 running stock Jelly Bean V3

I have tried my best to present the procedure in an easy and simple manner. But even then if u face any problem, feel free to discuss here.

Downloads:

Disclaimer: Even though the procedure is tested on Canvas2 excusively, I can't rule out any possibility of bricking or like that. But as long as you follow the instructions carefully, chances of things going out of favour are feeble. All the best.  

1. Install Canvas 2 drivers.
2. Extract SP Flash Tools and V3_120313_Update to Jelly Bean zip files.
3. Open SP Flash Tools.
4. Click on the Scatter-Loading button

 5. Browse to the MT6577_Android_scatter_emmc.txt in extracted 
         S9081_MP_F4.1_B1_IN_MMX_1.10 folder



 

6. In Flash Tool, go to Options and enable USB Mode.

7. Again go to Options >> DA Download All >> Speed >> Force to high speed.

8. Switch off the phone completely.


10. Now connect your phone to your PC.

11.Upgrade process will start. Flash Tool will start the flashing process. Yellow bar at the bottom of  the Flash Tool indicates the progress of process.

Don't disconnect phone or interrupt the process until you see the "OK" message

12. Once the process is completed, Green Ring will appear on your device which indicates that the process is completed successfully.